Sodium Polynaphthalene Sulfonate Uses For Concrete Additive Powder CAS 9084-06-4

Sodium Polynaphthalene Sulfonate Uses for Concrete Additive Powder CAS 9084-06-4

Polynaphthalene Sulfonate Water Reducer Supplier Product Description:

JF SODIUM NAPHTHALENE SULFONATE POWDER (SNF-B)

(Synonyms: Sodium salt of Sulfonated Naphthalene formaldehyde poly condensate in powder form)

The raw material naphthalene superplasticizer is non-corrosive, non-chlorine compound antifreeze admixture which has antifreezing, water-reducing, early-strength, air entraining, etc performance, helps to lower the freezing point, prevent concrete from freezing damage etc. It is ideal for construction in winter.

Polynaphthalene Sulfonate Superplasticizer Application:

1. Reduce 10 to 25 percent of cement content when the strength and the slump of the concrete are basically same.
2. When the water cement ratio is constant, it improves the initial slump of the concrete by more than 10cm, and the water-reducing ratio can reach 15 to 25 percent.
3. Has remarkable early strength and strengthening effects on the concrete, and improve the strength by 20 to 60 percent.
4. Improve the workability of the concrete and comprehensively improve the physical and chemical properties of the concrete.
5. Adapt to various cements well, and is well compatible with other types of 0s.
6. Particularly applicable to the following concrete projects: flowing concrete, plasticized concrete, steam-cured concrete, impermeable concrete, waterproof concrete, naturally-cured precast member concrete, reinforcing steel bars and prestressed reinforced concrete, high-strength and ultra-high-strength concrete.

Polynaphthalene Sulfonate Usage:

1. To provide initial workability especially with low water cement ratio.
2. To significantly improve the initial workability of site mixed concrete without increasing water demand.
3. To provide improved durability by increasing ultimate strengths and reducing concrete permeability.
4. To have high slump retention with early setting time.

Polynaphthalene Sulfonate Superplasticizer Typical Applications & Advantages:

1. Powerful plasticizing action with improved initial workability.
2. Reduces water cement ratio to the maximum which allows production of high strength concrete while saving cement use.
3. Improved cohesion and particle dispersion minimizes segregation and bleeding and improves pumpability.
4. Long haul and hot weather concreting.
5. Gains early strength with very high slump retention

Dosage:

The optimum dosage of Naphthalene Sulfonate Formaldehyde (SNF/ PNS) to meet specific requirements should always be determined by trials using the materials and conditions that will be experienced in use.

Our Suggestions As Below:

A. Blending dosage at 0.5%-1.0%, 0.6% mixing dosage advised.
B. Prepare solutions as required.
C. Direct use of powder agent is allowed. Alternatively the addition of the agent is followed by water Moisturization (water-cement ratio:60%).