Product Details:
Payment & Shipping Terms:
|
Appearance: | Brown Or Off-white Liquid | Solid Content: | 50% Min. |
---|---|---|---|
Sodium Sulfate Content: | 10% Max. | Fluidity Of Cement Past: | 260mm Min. |
PH: | 6-8 | Bulk Density: | 1.1±0.05g/cm3 |
Application: | Construction Chemical | Retarder Time: | 2-3 Hours |
High Light: | Type F Polycarboxylate Superplasticizer,Off White PCE Liquid,Brown PCE Liquid |
ASTM C 494 Type F Polycarboxylate Superplasticizer PCE Liquid For Super Slump Retention Type(40-50% Solid Content)
Polycarboxylate Superplasticizer PRODUCT DESCRIPTION:
Polycarboxylate superplasticizer JF-PL2
This product is polycarboxylate based superplasticizer, using polyether as main raw material. It has very good slump retention and adaptability to different cement and materials, especially for summer high temperature construction conditions and long-distance concrete
transport project.
Typical Properties:
Product Name: Polycarboxylate Slump Retention Superplasticizer Liquid | ||
Test Items | Test Results | |
Standards | ||
Appearance | Colorless to Slight | Conforms |
Brown Liquid | ||
Density(g/cm³) | 1.1±0.05 | 1.13 |
pH (1% aqueous solution) | 44355 | 6.56 |
50.0±1 | 50.51 | |
Solid Content(%) | ||
Chloride Content(%) | ≤0.1 | Conforms |
Slump Retention of | ≤30 | -25 |
1 Hour(mm) | ||
Water Reducing Ratio(%) | ≥25 | 28 |
Conclusion: Comply with the standard of GB 8076-2008 | ||
Storage: Kept in dry place with ventilation. |
PCE Liquid Performance:
1. high water reduction, water reduction rate of more than 25 to 40 percent.
2. high flow, high slump, concrete slump when small losses.
3. there is a significant hardening of concrete reinforcing effect, 3d strength can be increased 50 ~100%, 7d, 28d strength can be increased by
30-50%, the late strength remained stable growth.
4. good workability of fresh concrete, no segregation,good pumpability, sclerosing outside light in solid concrete.
5. chlorine-free, low-alkali, no corrosion of steel.
6. gas content can be adjusted according to project needs.
7. significantly improve the concrete antifreeze, impermeability,low-carbon capabilities, as well as anti-shrinkage and other indicators, can
significantly extend the service life of concrete.
8. the product has a good adaptability to meet the many varieties of cement, especially for fly ash, ground slag and other active admixture
preparation of high-strength, high flow, high performance concrete.
9. the product non-toxic, harmless to health and the environment are safe.
Effect On Concrete:
(1). Strong dispersion and high water reducing ratio. Suitable for making high strength concrete.
(2). Can effectively reduce concrete viscosity, good adhesion, moderate air content, suitable for pumping.
(3). Hardening and durability of concrete is good. Strength is high at every concrete ages. Good volume stability and anti-permeability, freezing thawing, anti-corrosion and anti-carbonation effect is good.
(4).Widely suitability for all mixing materials, such as portland cement, ordinary portland cement, slag portland, fly ash cement and volcanic ash cement.
(5). Environmental friendly and nontoxic.
Packing & Storage:
1.1ton/IBC tank, 24ton/Flexitank
It is recommended to be stored at ambient temperature in closed condition and to be protected from direct sunlight and rain.
Super Slump Retention Type, 40-50% Solid Content:
●Keep good performance in high temperature for a long time, especially for construction in high temperature in summer, it has better slump retention than the general slump retention type.
●It can be used for long time transportation, poor slump retention caused by high temperature, and other construction requirements and construction areas.
●It can be formulated with different types of polycarboxylate superplasticizer according to the actual needs.
●It can be used as a mother liquor to produce other functional admixture, such as early strength type, retarder, pumping concrete admixture, antifreezer, etc.;
●Environmental friendly products: the production does not pollute the environment.
Contact Person: Ms. SHANSONG JUFU CHEM TECH
Tel: 86-053188987705
Fax: 86-0531-8898-7710