Product Details:
Payment & Shipping Terms:
|
Appearance: | Brown Or Off-white Liquid | Solid Content: | 50% Min. |
---|---|---|---|
Sodium Sulfate Content: | 10% Max. | Fluidity Of Cement Past: | 260mm Min. |
PH: | 6-8 | Bulk Density: | 1.1±0.05g/cm3 |
Application: | Construction Chemical | Retarder Time: | 2-3 Hours |
High Light: | High Slump Retaining Type PCE Liquid,Off White Liquid Polycarboxylate Ether Superplasticizer |
High Slump Retaining Type Concrete Additive Polycarboxylate Ether Superplasticizer PCE Liquid
Polycarboxylate Superplasticizer PRODUCT DESCRIPTION:
Polycarboxylate superplasticizer JF-PL2
JF-PL2 is a new generation of polycarboxylic acid type high-performance water reducer made of isopentenyl polyoxyethylene ether and small monomer through free radical polymerization, which can significantly inhibit the slump loss of concrete.
The product is suitable for compounding with high water reducing polycarboxylate superplasticizer.
TYPICAL PROPERTIES:
Product Name: Polycarboxylate Slump Retention Superplasticizer Liquid | ||
Test Items | Test Results | |
Standards | ||
Appearance | Colorless to Slight | Conforms |
Brown Liquid | ||
Density(g/cm³) | 1.1±0.05 | 1.13 |
pH (1% aqueous solution) | 44355 | 6.56 |
50.0±1 | 50.51 | |
Solid Content(%) | ||
Chloride Content(%) | ≤0.1 | Conforms |
Slump Retention of | ≤30 | -25 |
1 Hour(mm) | ||
Water Reducing Ratio(%) | ≥25 | 28 |
Conclusion: Comply with the standard of GB 8076-2008 | ||
Storage: Kept in dry place with ventilation. |
PCE Main Technical Performance:
1. high water reduction, water reduction rate of more than 25 to 40 percent.
2. high flow, high slump, concrete slump when small losses.
3. there is a significant hardening of concrete reinforcing effect, 3d strength can be increased 50 ~100%, 7d, 28d strength can be increased by 30-50%, the late strength remained stable growth.
4. good workability of fresh concrete, no segregation,good pumpability, sclerosing outside light in solid concrete.
5. chlorine-free, low-alkali, no corrosion of steel.
6. gas content can be adjusted according to project needs.
7. significantly improve the concrete antifreeze, impermeability,low-carbon capabilities, as well as anti-shrinkage and other indicators, can significantly extend the service life of concrete.
8. the product has a good adaptability to meet the many varieties of cement, especially for fly ash, ground slag and other active admixture preparation of high-strength, high flow, high
performance concrete.
9. the product non-toxic, harmless to health and the environment are safe.
PCE Application:
1. JF-PL2 is a high slump retention type superplasticizer used in premixed and cast-in-place concrete in various industrial and civil buildings.
2. It is especially suitable high strength concrete for railway, haven, traffic, bridge and electric power and so on.
3. It is suitable for the preparation of high strength, high durability, self-compacting, steel fiber and self-leveling concrete.
Precautions:
This product is an alkali-free liquid, non-toxic, non-corrosive liquid, no pollution to the environment, not edible
If you accidentally touch your eyes, rinse them with clean water as soon as possible, causing allergies to some people. You should seek medical treatment promptly.
Packaging & Storage:
1.This product is liquid and is packed in 1000kg IBC tank or 200Kg plastic drum. And also use the Container bag, it will save some packing cost.
2. Products should be stored in 0℃-40℃ temperature environment, without direct sunshine, without getting wet in the rain and leaking water, without mixing impurities, without evaporation of water.
3. The shelf life of liquid products is 12 months. After expiration date, concrete test must be carried out to confirm the quality.
4. Sample usually delivery by express, it will need about 7 days to reach your area.2.Bulk goods usually delivery by sea, it will need about 35 days to reach, it will depend on the distance.
Contact Person: Ms. SHANSONG JUFU CHEM TECH
Tel: 86-053188987705
Fax: 86-0531-8898-7710