Product Details:
Payment & Shipping Terms:
|
Appearance: | Brown Or Off-white Liquid | Solid Content: | 50% Min. |
---|---|---|---|
Sodium Sulfate Content: | 10% Max. | Fluidity Of Cement Past: | 260mm Min. |
PH: | 5-8 | Bulk Density: | 1.1±0.05g/cm3 |
Application: | Construction Chemical | Retarder Time: | 2-3 Hours |
High Light: | 50% Solid Content Polycarboxylate Superplasticizer Liquid,Concrete Admixtures PCE Liquid,Mortar Additive Polycarboxylate Based Superplasticizer |
Polycarboxylate Superplasticizer Liquid 50% Solid Content Mortar Additive Concrete Admixtures
Polycarboxylate Superplasticizer PRODUCT DESCRIPTION:
Polycarboxylate superplasticizer JF-PL1
Polycarboxylate superplasticizer is a polycarboxylate based high range water-reducing admixture which enables concrete to be produced with very low water to cement ratios.Polycarboxylate superplasticizer does not contain added chlorides and will not promote corrosion in steel. Polycarboxylate superplasticizer is compatible with air-entraining agents, microsilica, accelerators and many other admixtures.
TYPICAL PROPERTIES:
Product Name: Polycarboxylate Slump Retention Superplasticizer Liquid | ||
Test Items | Test Results | |
Standards | ||
Appearance | Colorless to Slight | Conforms |
Brown Liquid | ||
Density(g/cm³) | 1.1±0.05 | 1.13 |
pH (1% aqueous solution) | 44355 | 6.56 |
50.0±1 | 50.51 | |
Solid Content(%) | ||
Chloride Content(%) | ≤0.1 | Conforms |
Slump Retention of | ≤30 | -25 |
1 Hour(mm) | ||
Water Reducing Ratio(%) | ≥25 | 28 |
Conclusion: Comply with the standard of GB 8076-2008 | ||
Storage: Kept in dry place with ventilation. |
PCE Application:
1. Polycarboylate mixed with concretes above C45 will result in a more comprehensive and economical effect. Polycarboylate can also be applied in C45 below.
2. The blend dosage range of Polycarboylate is 0.1~0.4% (powder) of the weight of cements or gel material. The regular blend dosage is 0.15~0.30% (powder). Since water reduction rate of concrete mixed with Polycarboylate is relatively high, the concrete slump is sensitive to water content, which shall be strictly controlled during operation.
3. Polycarboylate can be directly added into mixing water or the wet concrete already mixed with mixing water. It is not recommended to add Polycarboylate into dry concrete mixture. Separate batcher and feeding tube are needed.
4. Adaptability of Polycarboylate to most cements are satisfactory, but to some cements, problems such as low water reduction rate, highslump loss may appear. Besides, the fineness and storage time of cement may also influence the application effect of Polycarboylate. In such situation, solutions such as appropriately increase the dosage or formulate other retarding components and so on may be applied.
5. Compatibility problem exists in the formulation of Polycarboylate and other superplasticizers. It is recommended that the necessary formulation experiment shall be conducted before application, so as to obtain the best effect.
6. With the application of Polycarboylate, air content of concrete is increased (usually by 3~5%). It is good for improving the workability and durability of concrete. Certain amount of defoamer may be added if the air content needs to be reduced.
7. Polycarboylate is retarded, and the setting time of concrete can be controlled, so construction requirements can be better satisfied.
Features & Benefits:
A. Wide adaptation scope: not only used in cement-based materials, but also gypsum-based materials,strong adaptability to various kinds of organic additives, such as water-soluble polymer, dispersible polymer powders has lttle effect on this product.
B. High water reducing rate:make the mortar water reducing rate of more than 30 %, greatly improving the fluidity of the mortar under the condition of same water content in mortar.
C. Early strength and high strength
D. High durability: Reduce mortar water-cement ratio, improve durability, reduce shrinkage and variations, reduce post-curing mortar shrinkage cracking.
E. Green Environmental Product: does not produce pollution of the environment; in line with ISO14000 International Environmental Management Standard.
Packaging & Storage:
This product is liquid, plastic drum, 1 ton / barrel or 200KG / barrel, can also be used for tank storage and storage process anti-seepage and leakage prevention, anti-exposure, anti-high, one year, after the expiration should be tested to determine the use.
Contact Person: Ms. SHANSONG JUFU CHEM TECH
Tel: 86-053188987705
Fax: 86-0531-8898-7710