High Strength Concrete Polycarboxylate Powder Pce For Concrete Additive

Polycarboxylate Ether Use in High Strength Concrete/PCE for Concrete Additive
 

Usage And Precautions:
1. Recommended usage amount: 0.1%-0.4%. Please determine the most suitable usage amount through tests.
2. Powdery products require longer stirring time.
3. Fully mix the product with cement or plaster first, before adding water and stirring it; if it is dissolved directly, slowly put the product into the water to prevent coagu lati ng, which slows the dissolution rate.
4. Avoid putting heavy things on the product during storage to avoid agglomeration. The storage temperature should be lower than 40°C.
5. After unpacking the product, seal it instantly to prevent clumping due to dampness.
Dosage:
Different solid contents have different dosages in the cement,please check it as follows.
1)OS-L (40%) : 0.4~0.6
2)OS-P (98%):0.2~0.25%
3)OS-A (98%):0.2~0.3%
 

 
Polycarboxylate Superplasticizer Product Features:
1. Hardness: After the concrete penetration of the sealing agent treatment of the ground, Mo's hardness will reach 8, MO's hardness increased by 45.3%;
2. Wear-resistant: solidified into a hard solid, increase hardness and compactness, wear resistance will be increases to more than 8 times
3. Dustproof: The sealing agent permeates into the concrete reacting with the silicate in concrete, forming a dustless and compact whole on the concrete surface, and permanently controls the concrete dust from the surface voids..
4. Anti-skid: general concrete ground, saline and alkaline components will be precipitated from the surface, leading to slippage.
5. Anti-pressure: compressive strength of the specimen compared to the treatment of the sample enhanced 27.3%, the flexural strength increased by 3 times.
6. Impermeability: Can effectively penetrate into the concrete, and its chemical reaction, fills ups the pores on the concrete surface leading to a permanent sealing effect, which can effectively inhibit water, oil and other surface dirt into the concrete.
7. Anti-weathering: can effectively prevent the passage of chloride ions. The test indicates that the treated ground will not be affected by exposure to electromagnetic or water mist.
8. Corrosion Resistance:Greatly improves the corrosion resistance of the concrete.

 
1. It can be transported in 25Kg plastic bags. Special packaging can be made according to user requirements.
2. This product is non-toxic and non-flammable, and can be transported as conventional chemicals.
3. Take cautions to prevent leakage, avoid exposure to sunlight, and keep it away from high temperature or pollution during storage.
4. This product has a shelf life of one year. After the expiration date, it can be used only after tests.